YY-Electron Wireless Home Security Alarm System Manuel de service Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 32
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
The JA-80H keypad can be used in two modes
either as an external system keypad for the
JA-8x control panel or as access control (door
lock). The keypad has a built in RFID reader and
can be installed outside a building. The keypad
is connected to the Oasis control panel via
a WJ-80 interface. When a valid code is entered
or a valid card is presented and the keypad
is in access control mode, the door will be
opened together with triggering an entry delay if it is set. There is also a button with a door bell function on the
keypad. When the button is pressed, the WJ-80 interface sends a radio signal for a JA-80L indoor wireless siren.
The JA-80N is a version with an external RFID card reader only.
Voltage 10 to 16 V DC
Standby consumption approx. 60 mA
Enclosure protection (EN 60529) IP 65
RFID cards Jablotron PC-01 or PC-02
(EM UNIQUIE 125 kHz)
Dimensions 46 x 150.5 x 22.5 mm
Length of supply cable 1 m
Enclosure protection (EN 60529) IP 65
Security grade 2 (EN 50131-1, TS 50131-3)
and RFID Readers
9
Do you care about your property?
Nowadays, it is not sufficient to lock the entrance
door or to rely on neighbours´ watchfulness.
A high fence, bars on the windows, solid blinds
and guard gates can make a thief’s work more
difficult, but they cannot stop him. On the other
hand, a thief can be attracted to a house or a flat
with a “fortress” style. An electronic security system
can be used as an effective and reliable guard.
The sirens sound at the property and information
about the alarm is forwarded to the owner’s
mobile phone and best of all, also directly
to a security agency – to an ARC.
The WJ-80 interface is used for the connection
of a JA-80H external keypad or a JA-80N RFID
card reader to a JA-8x control panel. It provides
an output for an electric door lock, it has an
input for a lock-opening button and wirelessly
sends a door bell signal. The output for an elec-
tric door lock can react to the Oasis control
panel’s PGY output. The interface can also be
used for connecting a non-Jablotron external
keypad (reader) to the system with Wiegand
26b protocol (e.g. HID RK-40 and RK-10).
Compatible with JA-8x control panels
Voltage supplied from the control panel bus
Standby consumption approx. 60 mA
(including JA-80H keypad)
Load capacity of output relay max. 5 A/60 V
Communication band 868 MHz
Communication protocol with keypads Wiegand 26b
Dimensions 76 x 110 x 33 mm
Security grade 2 (EN 50131-1, EN 50131-5-3)
WJ-80 Wiegand Interface Module
JA-80H External Keypad with RFID Reader
Keypads and
RFID Readers
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Commentaires sur ces manuels

Pas de commentaire